Operators Manual
Table Of Contents
WP 1550 Maintenance
wpm_tx001126gb.fm 29
5. Maintenance
5.1 Maintaining the Emission Control System
Normal maintenance, replacement or repair of emission control devices and
systems may be performed by any repair establishment or individual; however,
warranty repairs must be performed by a dealer/service center authorized by
WACKER NEUSON. The use of service parts that are not equivalent in
performance and durability to authorized parts may impair the effectiveness of the
emission control system and may have a bearing on the outcome of a warranty
claim.
5.2 Periodic Maintenance Schedule
5.2.1 Engine Maintenance
The chart below lists basic engine maintenance. Refer to the engine
manufacturer’s Operation Manual for additional information.
Daily
before
starting
After
first
20 hrs.
Every
2 weeks
or
50 hrs.
Every
month
or
100 hrs.
Every
year
or
300 hrs.
Check fuel level.
Check engine oil level.
Inspect fuel lines.
Inspect air filter. Replace as needed.
Clean air cleaner elements.
Change engine oil.
Clean engine cooling fins.
Clean sediment cup / fuel filter.
Check and clean spark plug.
Check and adjust valve clearance.
Change exciter oil.