Operators Manual
Table Of Contents
- Vibroplate
- Foreword 3
- 1. Emission System Control Information 4
- 2. Safety Information 5
- 3. Technical Data 15
- 4. Operation 18
- 5. Maintenance 23
- 5.1 Periodic Maintenance Schedule 23
- 5.2 Cleaning Plate 25
- 5.3 Drive Belt 25
- 5.4 Exciter Lubrication 26
- 5.5 Spark Plug 27
- 5.6 Engine Oil 28
- 5.7 Air Cleaner 29
- 5.8 Cleaning Sediment Cup 30
- 5.9 Adjusting Engine Speed 30
- 5.10 Carburetor Adjustment 31
- 5.11 Troubleshooting 32
- 5.12 Storage 33
- 5.13 Lifting Machine 34
- 5.14 Transporting Machine 35
- Foreword
- 7.1 Emission Control Systems Warranty Statement
- 2. Safety Information
- 2.1 Laws Pertaining to Spark Arresters
- 2.2 Operating Safety
- 2.3 Operator Safety while using Internal Combustion Engines
- 2.4 Service Safety
- 2.5 Label Locations
- 2.6 Warning and Informational Labels
- 2.7 Operating Labels
- 3. Technical Data
- 3.1 Engine Data
- 3.2 Machine Data
- 3.3 Sound and Vibration Specifications
- 3.4 Dimensions
- 4. Operation
- 4.1 Recommended Fuel
- 4.2 Before Starting
- 4.3 To Start
- 4.4 To Stop
- 4.5 Application
- 4.6 Operation
- 4.7 Wheel Kit (0162986)
- 5. Maintenance
- 5.1 Periodic Maintenance Schedule
- 5.2 Machine Maintenance
- 5.3 Cleaning Plate
- 5.4 Drive Belt
- 5.5 Exciter Lubrication
- 5.6 Spark Plug
- 5.7 Engine Oil
- 5.8 Air Cleaner
- 5.9 Cleaning Sediment Cup
- 5.10 Adjusting Engine Speed
- 5.11 Carburetor Adjustment
- 5.12 Troubleshooting
- 5.13 Storage
- 5.14 Lifting Machine
- 5.15 Transporting Machine
- Blank Page
WP 1540A/AW Safety Information
wpm_si000326gb.fm 13
2.7 Operating Labels
Wacker Neuson machines use international pictorial labels where
needed. These labels are described below.
Label Meaning
Open the fuel flow valve.
Push or turn engine switch to ON position.
Close the choke.
Place throttle in the IDLE position.
Pull the rewind starter.
Close the fuel flow valve.