Operators Manual
Table Of Contents
- 1 Preface
- 2 Introduction
- 3 Security
- 3.1 Policy
- 3.2 Areas of responsibility of the operator
- 3.3 Operator responsibilities
- 3.4 Personnel qualification
- 3.5 Residual dangers
- 3.6 General safety instructions
- 3.7 Specific safety instructions – Vibratory plates
- 3.8 General safety instructions - Combustion engines
- 3.9 General safety instructions – fuel, lubricants and coolants
- 3.10 Maintenance
- 3.11 Personal Protective Equipment
- 3.12 Safety devices
- 3.13 Behavior in dangerous situations
- 4 Safety and information labels
- 5 Setup and function
- 6 Components and operator's controls
- 7 Transport
- 8 Operation and use
- 9 Maintenance
- 10 Troubleshooting
- 11 Accessories
- 12 Technical data
- 14 Emission control systems information and warranty
13 Technical data
36 100_0202_td_0024.fm
13 Technical data
13.1 VP1135
Designation Unit VP1135A VP1135A US VP1135Aw VP1135Aw US
Item number 5100029066 5100029064 5100029065 5100029063
Centrifugal force kN 11.0
Oscillations Hz 98
rpm 5,880
Compaction performance* m
2
/h 618
Travel speed m/min 29.0
Gradeability % 36.4
Length (center pole in
working position)
mm 958
Width mm 355
Height mm 918
Operating weight kg 61 69
Ground clearance mm 467 566
Rated power** kW 2.6
Nominal speed rpm 3,600
Storage temperature range °C -15 – +40
Operating temperature range °C -15 – +45
Sound pressure level
At location of operation L
pA
dB(A) 93
Standard EN 500-4
Sound power level L
wa
measured
guaranteed
dB(A)
104
105
Standard EN 500-4
Vibration total value a
hv
m/s
2
4.7 4.5
Standard EN 500-4
Uncertainty of measurement
of the vibration total value a
hv
m/s
2
0.5
*
Depending on the soil properties.
**
Corresponds to the net installed power according to directive 2000/14/EC.