Datasheet

Safety Data Sheet (1907/2006/EC)
Material: 60083223
WACKER® SILICONE PASTE P 250
Version: 2.2 (GB) Date of print: 24.05.2017 Date of last alteration: 22.06.2016
Page: 3/8
7.2
Conditions for safe storage, including any incompatibilities
Conditions for storage rooms and vessels:
Observe local/state/federal regulations.
Advice for storage of incompatible materials:
Observe local/state/federal regulations.
Further information for storage:
Store in a dry and cool place.
7.3
Specific end use(s)
No data available.
SECTION 8: Exposure controls/personal protection
8.
8.1
Control parameters
Maximum airborne concentrations at the workplace:
not applicable
8.2
Exposure controls
8.2.1
Exposure in the work place limited and controlled
General protection and hygiene measures:
Observe standard industrial hygiene practices for the handling of chemical substances. Do not eat or drink when handling.
Personal protection equipment:
Respiratory protection
No personal respiratory protective equipment normally required.
Eye protection
Recommendation: protective goggles .
Hand protection
Use of protective gloves is recommended when handling the material.
Recommended glove types: Protective gloves made of nitrile rubber
thickness of the material: > 0,1 mm
Breakthrough time: > 480 min
Recommended glove types: Protective gloves made of butyl rubber
thickness of the material: > 0,3 mm
Breakthrough time: > 480 min
Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves.
Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion,
and the contact time. Note that, due to the numerous external influences (such as temperature), a chemically resistant protective
glove in daily use may have a service life that is considerably shorter than the measured break through time.
8.2.2
Exposure to the environment limited and controlled
Prevent material from entering surface waters, drains or sewers and soil.
SECTION 9: Physical and chemical properties
9.
9.1
Information on basic physical and chemical properties
Property:
Value:
Method:
Appearance
Physical state / form ............................................. :
paste
Colour ................................................................... :
opaque
Odour
Odour ................................................................... :
odourless
pH-Value
pH-Value .............................................................. :
not applicable