Datasheet

Technical data sheet for WACKER® SILICONE PASTE P 12 / Version: 1.9 / Date of last alteration: 02.02.2017 2 / 2
Product data
Typical general characteristics
Inspection Method
Value
Appearance
white
Density at 25 °C, at 1013 hPa
ISO 1183-1 A
2,1 g/cm³
Consistency a) unworked penetration
DIN ISO 2137
270 - 300 1/10 mm
Consistency b) worked penetration (60 strokes)
DIN ISO 2137
300 1/10 mm
Solidifying point
approx. - 45 °C
Operating temperature range
- 40 to + 200 °C
Loss of weight / Volatility
FED-STD 791 M 321;
30h / 200 °C
max. 1,2 %
Bleeding
FED-STD 791 M 321;
30h / 200 °C
max. 0,4 %
Thermal conductivity
0,81 W/(m K)
Dielectric strength
DIN 53481
10 kV/mm
Permittivity (50 Hz)
IEC 60250
3,5 εr
Dissipation factor (50 Hz)
IEC 60250
0,009
Insoluble in
water, methanol,
ethanol glycerol,
glycol
Soluble or dispersible in (except filler)
methylene chloride,
benzine, white spirit,
petroleum ether,
toluene, kerosene,
ethyl acetate etc.
These figures are only intended as a guide and should not be used in preparing specifications.
The data presented in this medium are in accordance with the present state of our knowledge but
do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the
right to alter product constants within the scope of technical progress or new developments. The
recommendations made in this medium should be checked by preliminary trials because of
conditions during processing over which we have no control, especially where other companies’
raw materials are also being used. The information provided by us does not absolve the user from
the obligation of investigating the possibility of infringement of third parties’ rights and, if necessary,
clarifying the position. Recommendations for use do not constitute a warranty, either express or
implied, of the fitness or suitability of the product for a particular purpose.
The management system
has been certified
according to
DIN EN ISO 9001 and
DIN EN ISO 14001
WACKER® is a trademark
of
Wacker Chemie AG.
For technical, quality, or
product safety questions,
please contact:
Wacker Chemie AG
Hanns-Seidel-Platz 4
81737 München, Germany
[e-mail]
www.wacker.com