Datasheet

Safety Data Sheet (1907/2006/EC)
Material: 60008010
ELASTOSIL® N10 TRANSPARENT
Version: 3.5 (GB) Date of print: 28.02.2017 Date of last alteration: 22.07.2016
Page: 5/9
SECTION 9: Physical and chemical properties
9.
9.1
Information on basic physical and chemical properties
Property:
Value:
Method:
Appearance
Physical state / form ............................................. :
liquid
Colour ................................................................... :
colourless
Odour
Odour ................................................................... :
slight
pH-Value
pH-Value .............................................................. :
not applicable
Melting point/freezing point
Melting point / melting range ................................ :
not applicable
Initial boiling point and boiling range
Boiling point / boiling range .................................. :
not applicable
Flash point
Flash point ............................................................ :
not applicable
Upper/lower flammability or explosive limits
Lower explosion limit (LEL) .................................. :
not applicable
Vapour pressure
Vapour pressure ................................................... :
not determined
Solubility(ies)
Water solubility / miscibility ................................... :
virtually insoluble
Vapour density
Relative gas/vapour density ................................. :
No data known.
Relative Density
Relative Density ................................................... :
approx. 1,02 (23 °C)
(Water / 4 °C = 1,00)
(DIN 53217)
Density ................................................................. :
approx. 1,02 g/cm³ (23 °C)
(DIN 53217)
Partition coefficient: n-octanol/water
Partition coefficient: n-octanol/water ..................... :
No data known.
Auto-ignition temperature
Ignition temperature ............................................. :
approx. 404 °C
(EN 14522)
Decomposition temperature
Thermal decomposition ........................................ :
No decomposition when used according to regulations.
Viscosity
Viscosity (dynamic) .............................................. :
8000 mPa.s at 23 °C
(Brookfield)
9.2
Other information
Re 9.2 solubility in water: Hydrolytic decomposition occurs.
SECTION 10: Stability and reactivity
10.
10.1 – 10.3
Reactivity; Chemical stability; Possibility of hazardous reactions
10.2 – 10.3
10.3 – 10.3
If stored and handled in accordance with standard industrial practices no hazardous reactions are known.
Relevant information can possibly be found in other parts of this section.
10.4
Conditions to avoid
moisture .
10.5
Incompatible materials
none known
10.6
Hazardous decomposition products
By hydrolysis: 2-butanone oxime . Measurements have shown the formation of small amounts of formaldehyde at temperatures
above about 150 °C (302 °F) through oxidation.