Datasheet

Safety Data Sheet (1907/2006/EC)
Material: 60008010 ELASTOSIL® N10 TRANSPARENT
Version: 3.0 (GB) Date of print: 22.08.2014 Date of last alteration: 13.02.2014
Page: 5/10
Precautions against fire and explosion:
Observe the general rules for fire prevention.
7.2
Conditions for safe storage, including any incompatibilities
Conditions for storage rooms and vessels:
none known
Advice for storage of incompatible materials:
not applicable
Further information for storage:
Protect against moisture. Keep container tightly closed and store in a cool, well ventilated place.
7.3
Specific end use(s)
No data available.
SECTION 8: Exposure controls/personal protection 8.
8.1
Control parameters
Maximum airborne concentrations at the workplace:
not applicable
Further information:
Maximum concentration at workplace recommended by producer: methyl ethyl ketoxime (MEKO, CAS no. 96-29-7, product of
hydrolysis) = 3 ppm .
8.2
Exposure controls
8.2.1 Exposure in the work place limited and controlled
General protection and hygiene measures:
Avoid contact with eyes and skin. Do not inhale gases/vapours/aerosols. Do not eat, drink or smoke when handling. Wash hands
at the end of work and before eating. Avoid exposure of the substance to pregnant women.
Personal protection equipment:
Respiratory protection
In case of long or strong exposure: gas mask filter ABEK .
Hand protection
Protective gloves made of butyl rubber , nitrile rubber protective gloves . Gloves suitable for up to 60 minutes' use. The selection
of appropriate gloves not only depends on the material, but also on other quality characteristics, and may vary depending on the
manufacturer. Please observe information from your glove supplier in terms of permeability and breakthrough time.
Eye protection
protective goggles .
Skin protection
protective clothing .
8.2.2 Exposure to the environment limited and controlled
Prevent material from entering surface waters and soil.
SECTION 9: Physical and chemical properties 9.
9.1
Information on basic physical and chemical properties
General information:
Physical state / form................................................: liquid
Colour .....................................................................: colourless
Odour......................................................................: slight
Important information about the protection of health, safety and the environment:
Property: Value: Method:
Melting point / melting range ...................................: not applicable