Datasheet

Technical data sheet for ELASTOSIL® A33 / Version: 1.0 / Date of last alteration: 30.07.2008 2 / 2
Product data
Typical general characteristics Inspection Method Value
Product data (uncured)
Color ivory
Density at 25 °C DIN 51757 1,15 g/cm³
Viscosity ISO 3219 non-slump
Skin-forming time, 23 °C, 50 % RH 10 - 30 min
Curing time, 23 °C, 50 % RH 12 - 24 h/mm
Product data (cured)
Density at 23 °C DIN EN ISO 1183-1 /
ISO 2781
1,15 g/cm³
Hardness Shore A DIN 53505 /
ISO 868
25
Elongation at break DIN 53504 S1 /
ISO 37
350 %
Tensile strength DIN 53504 S1 /
ISO 37
2,5 N/mm
2
Tear strength ASTM D 624 B 7,0 N/mm
2 mm, 14 d storage at 20 °C, 50 % RH
These figures are only intended as a guide and should not be used in preparing specifications.
The data presented in this leaflet are in accordance with the present state of
our knowledge, but do not absolve the user from carefully checking all
supplies immediately on receipt. We reserve the right to alter product
constants within the scope of technical progress or new developments. The
recommendations made in this leaflet should be checked by preliminary trials
because of conditions during processing over which we have no control,
especially where other companies' raw materials are also being used. The
recommendations do not absolve the user from the obligation of investigating
the possibility of infringement of third parties' rights and, if necessary,
clarifying the position. Recommendations for use do not constitute a warranty,
either express or implied, of the fitness or suitability of the products for a
particular purpose.
The management system has been
certified according to DIN EN ISO
9001 and DIN EN ISO 14001
WACKER is a trademark of Wacker
Chemie AG.
ELASTOSIL® is a trademark of
Wacker Chemie AG.
For technical, quality, or product
safety questions, please contact:
Wacker Chemie AG
Hanns-Seidel-Platz 4
81737 München, Germany
[e-mail]
www.wacker.com