Operators Manual
Table Of Contents
- 1. Foreword
- 2. Safety information
- 3. Technical data
- 4. Description
- 5. Transport to the worksite
- 6. Operation
- 6.1 Adjusting the handle
- 6.2 Adjusting the guide wheel
- 6.3 Cutting depth setting
- 6.4 Depth of cut indicator
- 6.5 Water tank
- 6.6 Parking brake
- 6.7 Assembling the cutting blade
- 6.8 Disassembling the cutting blade
- 6.9 Checking the motor before starting
- 6.10 Starting the engine
- 6.11 Operating the engine
- 6.12 Turning off the engine
- 7. Maintenance
- 8. Signs
- EC Declaration of Conformity
- DIN EN ISO 9001 Certificate
Operation
T01109en.fm 26
6.11 Operating the engine
Once the engine has warmed up, gradually slide the choke lever to the
OPEN position. Set the desired engine speed via the throttle lever (4).
Oil level warning system
The oil level warning system is designed to prevent engine damage caused
by insufficient oil in the crankcase. Before the oil level can drop below the
safe minimum level, the oil level warning system will automatically shut off
the engine (the main switch remains in the position "1").
6.12 Turning off the engine
To turn off the engine in the event of an emergency, switch the main
switch (1) to "0". Under normal circumstances, proceed as follows:
1. Push the throttle lever (2) backwards as far as it goes.
2. Switch the main switch (1) to "0".
3. Close the fuel tap.
4
2