Operators Manual
Table Of Contents
- 1. Foreword
- 2. Safety information
- 3. Technical data
- 4. Description
- 5. Transport to the worksite
- 6. Operation
- 6.1 Adjusting the handle
- 6.2 Adjusting the guide wheel
- 6.3 Cutting depth setting
- 6.4 Depth of cut indicator
- 6.5 Water tank
- 6.6 Parking brake
- 6.7 Assembling the cutting blade
- 6.8 Disassembling the cutting blade
- 6.9 Checking the motor before starting
- 6.10 Starting the engine
- 6.11 Operating the engine
- 6.12 Turning off the engine
- 7. Maintenance
- 8. Signs
- EC Declaration of Conformity
- DIN EN ISO 9001 Certificate
Operation
T01109en.fm 20
6.5 Water tank
The floor saw features an integrated, removable water tank (1).
To fit the water tank, attach the retaining clamp (2) and tighten it with
the strap (3).
To remove the water tank or to attach an external water supply, you
can disconnect the hose on two different spots (4).
The amount of water can be regulated or stopped (5).
Note: You should remove the water tank if the machine is connected to an
external water supply.