Operators Manual
Table Of Contents
- 1. Foreword
- 2. Safety information
- 3. Technical data
- 4. Description
- 5. Transport to the worksite
- 6. Operation
- 6.1 Adjusting the handle
- 6.2 Adjusting the guide wheel
- 6.3 Cutting depth setting
- 6.4 Depth of cut indicator
- 6.5 Water tank
- 6.6 Parking brake
- 6.7 Assembling the cutting blade
- 6.8 Disassembling the cutting blade
- 6.9 Checking the motor before starting
- 6.10 Starting the engine
- 6.11 Operating the engine
- 6.12 Turning off the engine
- 7. Maintenance
- 8. Signs
- EC Declaration of Conformity
- DIN EN ISO 9001 Certificate
Operation
T01109en.fm 18
6.2 Adjusting the guide wheel
6.2.1 Adjusting the guide wheel
The guide wheel is designed to help the operator in making long,
straight cuts. The guide wheel can be exactly adjusted to the cutting
blade by loosening the jam nut (1) and turning the screw (2).
6.2.2 Aligning the guide wheel
To do this, make a cut of approx. 2 m length on a flat surface and with
the minimum cutting depth. Then pull back the machine without lateral
force. Then you can align the guide wheel exactly with the cut.