Operators Manual
Table Of Contents
- 1. Foreword
- 2. Safety information
- 3. Technical data
- 4. Description
- 5. Transport to the worksite
- 6. Operation
- 6.1 Adjusting the handle
- 6.2 Adjusting the guide wheel
- 6.3 Cutting depth setting
- 6.4 Depth of cut indicator
- 6.5 Water tank
- 6.6 Parking brake
- 6.7 Assembling the cutting blade
- 6.8 Disassembling the cutting blade
- 6.9 Checking the motor before starting
- 6.10 Starting the engine
- 6.11 Operating the engine
- 6.12 Turning off the engine
- 7. Maintenance
- 8. Signs
- EC Declaration of Conformity
- DIN EN ISO 9001 Certificate
Operation
T01109en.fm 17
6. Operation
6.1 Adjusting the handle
6.1.1 Handle
The width and height of the handles can be adjusted according to the
use and the body height of the operator. To do this, release the
clamping lever (1) and apply it in the new position.
6.1.2 Stirrup handle (alternative version)
The height of the stirrup handle can be adjusted according to the use
and the body height of the operator.
Loosen the knurled screws (1) on both sides, swivel the handle to the
desired position and retighten the two knurled screws.