Operators Manual
Table Of Contents
- 1. Foreword
- 2. Safety information
- 3. Technical data
- 4. Description
- 5. Transport to the worksite
- 6. Operation
- 6.1 Adjusting the handle
- 6.2 Adjusting the guide wheel
- 6.3 Cutting depth setting
- 6.4 Depth of cut indicator
- 6.5 Water tank
- 6.6 Parking brake
- 6.7 Assembling the cutting blade
- 6.8 Disassembling the cutting blade
- 6.9 Checking the motor before starting
- 6.10 Starting the engine
- 6.11 Operating the engine
- 6.12 Turning off the engine
- 7. Maintenance
- 8. Signs
- EC Declaration of Conformity
- DIN EN ISO 9001 Certificate
Description
T01067en.fm 13
4. Description
4.1 Application
∗ Cutting expansion joints in concrete and asphalt surfaces.
∗ Repair work on streets, e.g. cutting out damaged areas in asphalt and
concrete.
∗ Straightening blacktops and concrete surfaces.
∗ For demolition jobs and refurbishment of old buildings.
∗ Sawing off precast concrete parts.
∗ Expansion joints and installation channels in floors.
∗ Laying induction loops and cables in signal installations.
4.2 Maximum permissible tilt
The maximum permissible tilt applies to the engine level.