Instructions / Assembly

PST2/PSTF2 400 Operation
wc_tx000111gb.fm 13
2.4 Installing the Float (if equipped)
See graphic: wc_gr005664
2.4.1 Set the length of the float lead wire to the dimension indicated below.
Failure to set the correct lead wire length will lead to improper
operation of the pump.
NOTICE: Install the float so that it moves freely up and down. If the
float binds or catches, it will cause the pump to operate improperly.
Pump model Length “L”
PSTF2 400 150 mm (5.9 in.)
wc_gr005664