Use and Care Manual

wc_tx003296gb_FM10.fm

Rammer

Maintenance

5.9 Checking and Changing the Engine Oil

When

► Check the engine oil daily, before starting the machine.

► Change the engine oil every month, or after every 100 hours of operation.

Requirements

■ Engine is stopped, but still warm

■ Fresh engine oil (see Technical Data for quantity and type).

■ Plastic cloth and a container of sufficient volume to collect drained oil

Note: Collect, store and dispose of drained oil in accordance with current

environmental protection regulations.

Checking

Perform the procedure below to check/change the engine oil.

1. Set the rammer on a level surface as shown.

2. Remove the dipstick (a) and wipe it clean.

3. Re-insert the dipstick as shown to check the oil level. Do not thread it in.

4. Add oil as needed so that the engine oil level is up the opening (c).

This procedure continues on the next page.

WARNING

Burn hazard. Engine and exhaust pipe become extremely hot during operation.

► Stop the engine and allow the machine to cool before changing the engine oil.

WARNING

Most used oil contains small amounts of materials that can cause cancer and other

health problems if inhaled, ingested, or left in contact with skin for prolonged

periods of time.

► Take steps to avoid inhaling or ingesting used engine oil.

► Wash skin thoroughly after exposure to used engine oil.

wc_gr011601