Use and Care Manual

wc_tx003296gb_FM10.fm
44
Rammer
Maintenance
5.2 Periodic Maintenance Schedule
The table below lists basic machine maintenance and engine maintenance. Refer
to the engine manufacturer’s owner’s manual for additional information. Tasks
designated with check marks may be performed by the operator. Tasks designated
with square bullet points require special training and equipment.
1
Change engine oil after first 20 hours of operation.
2
Change ramming system oil after first 50 hours of operation.
Daily
before
starting
After
first
5
hours
Every
week
or 25
hours
Every
month
or 100
hours
Every
3
months
or 300
hours
Every
5
months
or 500
hours
Every
year
Check engine oil.

Check and replace air filter as
needed.

Check ramming system oil
level in sightglass.

Check fuel line and fittings for
cracks or leaks. Replace as
needed.

Tighten ramming shoe
hardware.

Inspect the machine.

Clean engine cooling fins.

Clean and check spark plug
gap.

Change engine oil.
1

Change ramming system oil.
2

Inspect central lifting cable for
wear, damage, or abuse.

Replace in-line fuel filter
assembly.

Replace spark plug.

Inspect and clean in-tank fuel
filter.
