Replacement Part List

Patented oil-injection system
provides reliable performance.
The no-mix system is an
added convenience for
operators. An amazing fuel
to oil ratio of 120:1 allows
for longer and cleaner
running times... up
to 100 hours on a
single tank of oil.
A low oil shutdown
switch prevents running
the rammer without
oil. Exclusive air filter
compensation system
allows for longer run time
between filter changes.
Oil-injected Vibratory Rammers
BS 50-2i BS 60-2i BS 70-2i
TECHNICAL DATA
Length x width x height in 26.5 x 13.5 x 37 26.5 x 13.5 x 38 26.5 x 13.5 x 38
Shoe size (w x l) in 11 x 13 11 x 13 11 x 13 or 13 x 13
Operating weight lbs 131 145 164
Shipping weight lbs 142 156 175
Shipping size (l x w x h) in 39 x 15 x 27 39 x 15 x 27 39 x 15 x 27
Stroke in 2.53 3.13 2.6
Percussion rate blows/min 700 700 650
Travel speed ft/min 31 32 29
Compacted area
11 in shoe ft²/h 1710 1763 1598
13 in shoe 1884
Engine type air-cooled, 2-cycle, single cylinder,
Wacker Neuson WM 80 gasoline engine
Displacement in³ 4.9 4.9 4.9
Operating speed rpm 4400 4400 4400
Max. rated power hp 2.2 2.4 2.7
at rated speed rpm @ 4400 @ 4400 @ 4400
Power rating specification 80/1269/EEC, ISO 3046-1
Fuel to oil ratio 120:1 120:1 120:1
Fuel consumption qt/h 1.1 1.3 1.4
Fuel tank capacity qt 3.2 3.2 3.2
Oil tank capacity qt 1.3 1.3 1.3
Power train Power train from engine via centrifugal clutch, gears, crank
mechanism, connecting rod, guiding piston, double spring
system, spring cylinder onto ramming shoe. Clutch
engages when accelerating.
4_5
BS 50-2i
BS 70-2i
BS 60-2i