Replacement Part List

These high-frequency motor-in-head vibrators
feature a unique integrated converter
that allows the units to plug directly into
a standard 115V outlet. This patented
system gives you the performance of
high-frequency without an expensive
high-cycle generator. The micro-inverter
automatically changes single phase 60
cycle to three phase 200 Hertz which
guarantees consistent RPM with no
loss under load.
IRFU 30 IRFU 38 IRFU 45
TECHNICAL DATA
Vibrator head diameter in 1.2 1.5 1.8
Vibrator head length (l) in 13.9 13.6 15.0
Shipping size (l x w x h) in 29.5 x 6.7 x 23.6 29.5 x 6.7 x 23.6 29.5 x 6.7 x 23.6
Protective hose length ft 16.4 16.4 16.4
Vibrator head weight lb 3.0 4.9 7.7
Total weight lb 25.3 31.1 34.0
Shipping weight lb 29.5 39.7 41.9
(including packaging)
Effective compaction diameter in 15.7 19.7 23.6
(depending on concrete consistency)
Vibrations vpm 12,000 12,000 12,000
Input voltage/phase V/~ 110-130/1~ 110-130/1~ 110-130/1~
Input frequency Hz 50 - 60 50 - 60 50 - 60
Input current A 4.4 7.0 9.6
Power cable length ft 49.2 49.2 49.2
(plug to Bodyguard
®
) + 1.6 + 1.6 + 1.6
Drive motor high frequency squirrel-cage induction motor with
electronic frequency inverter integrated into switch housing
for direct main supply using 110-130 V, 50/60 Hz, 1~
Head voltage/phase V/~ 214/3~ 214/3~ 214/3~
Head frequency Hz 200 200 200
Power transmission directly from the built-in 3-phase high frequency induction motor to the vibration system.
High Frequency Internal Vibrators
with Integrated Inverter
32_33