Light Equipment Product Guide COMPACTION I CONCRETE I DEMOLITION I UTILITY I CLIMATE
Wacker Neuson is a global manufacturer of light and compact equipment with a comprehensive product portfolio. Wacker Neuson’s emphasis stands firmly on outstanding quality, innovative technology, personalized service and close customer contact. In the United States, Wacker Neuson products are sold and rented by a network of dealers and supported by an industry leading team of factory trained sales, application and service personnel. Look no further than Wacker Neuson...
Table of contents COMPACTION Rammers 4-9 Plates 10-23 Rollers 24-29 CONCRETE Vibrators Screed Trowels 30-36 37 38-45 DEMOLITION Saws 46-47 UTILITY Pumps 48-65 Generators 66-80 Lighting 81-86 CLIMATE Dehumidifiers 87 Infrared heaters 88
Oil-injected Vibratory Rammers Patented oil-injection system provides reliable performance. The no-mix system is an added convenience for operators. An amazing fuel to oil ratio of 120:1 allows for longer and cleaner running times... up to 100 hours on a single tank of oil. A low oil shutdown switch prevents running the rammer without oil. Exclusive air filter compensation system allows for longer run time between filter changes.
CONCRETE This rammer has set the standard in the construction industry. Powered by the exclusive WM 80, this 2-cycle engine is specifically designed and built for vibratory rammers and meets EPA air emission standards. Exclusive air filter compensation system allows for longer run time between filter changes. BS 50-2 in 26.5 x 13.5 x 37 Shoe size (w x l)* in 10 x 13 Operating weight lbs Shipping weight lbs 129 140 Shipping size (l x w x h) in 39 x 15 x 27 Stroke in 1.
Four-cycle Vibratory Rammers The preferred vibratory rammer design in the industry i s available with a WM 100 or a Honda GX100 4-cycle engines. These Rammers are designed for the compaction of cohesive, mixed and granular soils in confined areas. Exclusive air filter compensation system for longer run time between filter changes. TECHNICAL DATA BS 60-4s BS 50-4s BS 50-4s BS 60-4s Length x width x height in 26.5 x 13.5 x 37 26.5 x 13.
COMPACTION CONCRETE BS 60-4As BS 60-4As Length x width x height in 26.5 x 13.5 x 37 26.5 x 13.5 x 38 Shoe size (w x l) in 11 x 13 11 x 13 Operating weight lbs 141 158 Shipping weight lbs 158 176 Shipping size (l x w x h) in 39 x 15 x 27 39 x 15 x 27 Stroke 3.1 Percussion rate in 2.2 blows/min 680 690 ft/min 24.0 23.
Diesel Vibratory Rammer This diesel rammer offers maximum production, performance and durability while providing you the convenience of standardizing your diesel fleet. A well-balanced, lightweight machine for easy handling and operation. The DS 70 is ideally suited for the most demanding compaction of cohesive, mixed and granular soils in confined areas. DS 70 DS 70 TECHNICAL DATA Length x width x height in 27.4 x 16.5 x 42.
COMPACTION CONCRETE DEMOLITION UTILITY CLIMATE COMPACTION I CONCRETE I DEMOLITION I UTILITY I CLIMATE
Premium Vibratory Plates These plates are designed for the compaction of granular and mixed materials with some cohesive content in confined areas. Featuring tough, wear resistant, ductile iron baseplate offering high strength and shock resistance, with a tapered bottom and edges for high speed and excellent maneuverability. WP 1540 TECHNICAL DATA Length x width x height WP 1550A WP 1550 WP 1540A WP 1550A in 34.5 x 15.5 x 38 34.5 x 19.5 x 38 34.5 x 15.5 x 38 34.5 x 19.
CONCRETE Designed for the compaction of asphalt as well as granular and mixed materials with some cohesive content in confined areas. Large capacity, semi-transparent polyethylene water tank with filter, located within the front lift cage for protection. COMPACTION Premium Vibratory Asphalt Plates WP 1550AW with wheels 34.5 x 15.5 x 38 34.5 x 19.5 x 38 34.5 x 15.5 x 38 34.5 x 19.5 x 38 (handle in working position) Lowest working height 20 20 20 20 Size of baseplate (w x l) in 15.5 x 23 19.
Value Vibratory Plates These value vibratory plates offer functionality and performance at a value price. The compact design allows for compaction of mixed soils in the narrowest of spaces – even in extremely narrow trenches. The VP 1135 models offer baseplates of 14 inches wide by 21 inches in length and centrifugal force of 2470 lbs. The asphalt models feature a large capacity water tank and wide filler opening. VP 1135AW VP 1135A VP 1135AW in 37.5 x 14 x 35 37.
COMPACTION CONCRETE These value plate models offer 15.5 inch wide baseplates and 2925 lbs of centrifugal force. The asphalt models feature a large capacity water tank and wide filler opening for easier filling and improved productivity. VP 1340A / VP 1340AW Length x width x height (handle in working position) in 40 x 15.5 x 32 40 x 15.5 x 35 Lowest operating height Operating weight in 26.5 26.5 Size of base plate (w x l) Shipping weight (including packaging) lbs 163 / 168 163 / 168 in 15.
Value Vibratory Plates These plates are optimally suited for a variety of compaction applications thanks to their high speed and simple maneuverability. The asphalt plate models feature a large capacity water tank and wide filler opening. Plates feature a baseplate width of 19.5 inches. VP 1550W TECHNICAL DATA Length x width x height (handle in working position) in VP 1550 / VP 1550W VP 1550A / VP 1550AW 40 x 19.5 x 35 40 x 19.
COMPACTION CONCRETE The largest models in the value plate line feature specially designed exciter bearings to reduce maintenance and are suitable for hot asphalt applications (water tank available). Models offer a baseplate width of 19.5 inches. VP 2050A / VP 2050AW 230/233 Operating weight lbs 233 Shipping weight lbs 240 235/240 Lowest operating height in 27 27 Size of base plate (w x l) in 20 x 23 20 x 23 Shipping size (l x w x h) in 29 x 22 x 33 29 x 22 x 33 80 Max.
Reversible Vibratory Plates Versatile reversible plates ideal for compaction of interlocking paving stones, trenches, landscaping and maintenance. The only plates with a durable, integrated wheel set that provides for maximum built-in mobility. Single lever direction control provides for easy operation. BPU 2540A TECHNICAL DATA BPU 2540A BPU 3050A DPU 3050H 385.8 Operating weight lbs 309 366 Shipping weight lbs 344 398 430.1 Operating width in 15.8 19.7 19.7 Machine height in 26 27.
COMPACTION Reversible Vibratory Plates CONCRETE The reliable plates with a unique integrated wheel set deliver excellent compaction performance in their size class. The small dimensions and the great maneuverablility, combined with high engine power, result in extraordinarily high productivity. Ideal for compaction of interlocking paving stones, trenches, landscaping and maintenance. Single lever direction control provides for easy operation. DPU 3750H Operating weight lbs 529.1 544.
Gasoline Reversible Vibratory Plates The best compaction of various types of soil, showing their true strength when working on semi-cohesive soils. These reversible plates provide optimum performance along with a variable forward and reverse speeds. Plus, the dual shaft exciter technology provides the maximum possible compaction depth in most types of soil. TECHNICAL DATA BPU 5545A BPU 4045A BPU 5545A 749 Operating weight lbs 710 Shipping weight lbs 748 767 Operating width in 17.7 17.
CONCRETE These diesel plates offer infinitely variable forward and reverse operation for easy maneuverability. Ideal for trenches and over large areas, vibrating heavy interlocking paving stones and spot compaction. The ductile iron baseplate is impact and wear resistant. An optimum shockmount design reduces handle vibration, operator fatigue and engine wear. Available with Compatec compaction control system.
Diesel Reversible Vibratory Plates Low profile unit features standard extension plates providing adjustable operating widths. A reliable Hatz diesel engine with a low-oil shutdown switch and a maintenance-free alternator without V-belt. The heavy-duty roll cage and lifting eye provide for easy loading and placement into trenches. Available with Compatec compaction control system. TECHNICAL DATA DPU 6555He DPU 6555He DPU 6555Hec 1095.7 Operating weight lbs 1091.3 Shipping weight lbs 1104.5 1106.
COMPACTION CONCRETE The DPU 7060Ft features an infrared remote control with stand-by mode and intelligent technology. The machine will immediately go into idle running mode and stop all travel movements when the operator lets go of the joysticks. The infrared remote control also uses a line of sight signal for added safety. DPU 7060Ft 1296 lbs 1411 Operating width in 313 Machine Height in 31.5 Shipping size (l x w x h) in 49.2 x 33.9 x 39.4 Baseplate thickness in 0.55 Max.
Diesel Reversible Vibratory Plates Enormous compaction depth and a high surface capacity and is simple and safe to use thanks to a reliable “electronic control” at the height of the guide handle. The direction can be changed directly at the guide handle without repositioning. Hydraulic oil cooling system offers superior high temperature performance and durability. DPU 100-70Les DPU 100-70Les TECHNICAL DATA Operating weight lbs Shipping weight lbs 1714 Operating width in 28.
DPU 130 LE Shipping weight (including packaging) 50 x 47.32 x 38.9 2613 lbs 2668 Working width in 47.2 Machine Height in 38.9 Baseplate thickness in 0.6 Max. centrifugal force lbf 29,225 Vibration frequency Max. forward and reverse speed Max. compacted area* vpm ft/min ft² 3480 102 24,025 Engine type water-cooled four-cylinder diesel engine Kohler Max. power output at (DIN ISO 3046) hp rpm 32.9 3600 Rated power output at (DIN ISO 3046) hp rpm 21.5 2700 Fuel consumption qt/h 4.
Single Drum Vibratory Rollers Lightweight and highly maneuverable roller has infinitely variable hydrostatic drive with high curb clearance and close side clearance. TECHNICAL DATA Length x width x height Operating weight in RS 800A RS 800A RSS 800A 84 x 33 x 50 85.5 x 33 x 50 lbs 975 1000 Drum diameter in 22 22 Drum width in 28.3 28.
RD 7He RD 7A 1448 Dry weight lbs 1566 Operating weight lbs 1624 1512 Drum diameter in 16.5 16.5 Drum width in 25.6 25.6 Overall size with handle down (l x w x h) in 93.1 x 27.5 x 45.8 93.1 x 27.5 x 45.8 Curb clearance (R and L) in 8.2 8.2 Side clearance (R and L) in 0.9 0.9 gal 15.9 15.
Vibratory Trench Roller Articulated trench roller features a dual joystick control and smart infrared remote control system for added safety. The extendable drums allow the machine’s width to be converted from 32” to 22” wide. RTLx-SC3 TECHNICAL DATA Operating weight RTL82-SC3 RTx SC3 RTKx-SC3 RTK82-SC3 lbs 3295 3197 3235 3134 Drum diameter in 20.5 20.5 20.5 20.5 Drum width in 22 / 32 32 22 / 32 32 Overall size (l x w x h) in 73 x 32 x 50 73 x 32.
RD 12A-90 Dry weight lbs 2171 2171 Operating weight* lbs 2491 2491 Weight w/ ballast in rear drum lbs 2689 2689 Drum diameter in 22 22 Drum width in 35.4 35.4 Overall size** (l x w x h) in 71.8 x 40.8 x 90.6 71.8 x 40.8 x 90.6 Curb clearance (R and L) in 15.7/8.2 15.7/8.2 in Side clearance (R and L) 1.9/3.5 1.9/3.5 Water tank capacity gal 26.4 26.4 Shipping weight lbs 2230 2230 Shipping size (l x w x h) with ROPS down in 79.8 x 42.6 x 58.0 79.8 x 42.6 x 58.
1.5-ton Hydrostatic Vibratory Roller Dual drum drive for maximum traction and articulated steering for accurate control. Dieselpowered unit offers dual drum vibration for a high quality asphalt finish. A high exciter frequency allows compaction at faster speeds and even coverage. RD 16-90 TECHNICAL DATA RD 16-90 RD 16-100 3067 Dry weight lbs 2990 Operating weight* lbs 3274 3351 Drum diameter in 22 22 Drum width in 35.4 39.4 Overall size (l x w x h)** in 76.8 x 39.4 x 100.3 76.8 x 43.
RD 27 TECHNICAL DATA RD 27-100 RD 27-120 Dry weight lbs 5030 5510 Operating weight* lbs 5470 5950 Drum diameter in 27.6 27.6 Drum width in 39.4 47.2 Overall size (l x w x h)** in 98.4 x 43.5 x 109.1 98.4 x 51.4 x 109.1 Curb clearance (R and L) in 20.2 20.2 Side clearance (R and L) in 2 2 gal 50 50 Water tank capacity Shipping weight lb 5340 5820 Shipping size (l x w x h) in 88 x 47 x 108 88 x 55 x 108 Engine type 111.4 111.4 rpm 2700 2700 37.5 @ 2700 37.
Flex-shaft Internal Vibrators A 5000 The Head, Motor and Shaft (HMS) system is extremely versatile. These high frequency flex-shaft internal vibrators can be adapted to every type of application. Heads and shafts can be easily combined and rapidly exchanged to match the right equipment to the job. Unique hybrid heads offer optimum concrete consolidation and movement. HMS systems provide reliable performance and quality concrete.
COMPACTION CONCRETE M 1500 M 2500 SM4-E SM0-S SM1-S SM2-S Length ft 3 6.5 13 1.5 3 6.5 Weight lbs 3.3 5.5 9.5 2.9 6.0 9.5 SM3-S SM4-S SM5-S SM7-S SM9-S Length ft 10 13 16.5 23 30 Weight lbs 13 15.7 20.5 28.4 33.3 H 25S H 25HA H 35S H 35HA H 45S SHAFTS VIBRATOR HEADS DEMOLITION SM1-E SM2-E H 45HA HR 48 Diameter in 1.0 1.0 1.4 1.4 1.8 1.8 1.89 Length in 11.7 15.0 12.3 15.9 12.0 15.4 14.0 Weight lbs Suitable flexible shafts VIBRATOR HEADS 1.
High Frequency Internal Vibrators with Integrated Inverter These high-frequency motor-in-head vibrators feature a unique integrated converter that allows the units to plug directly into a standard 115V outlet. This patented system gives you the performance of high-frequency without an expensive high-cycle generator. The micro-inverter automatically changes single phase 60 cycle to three phase 200 Hertz which guarantees consistent RPM with no loss under load.
COMPACTION CONCRETE IRFU 65 IRFU 60HR Vibrator head diameter in 2.3 2.6 2.6 Vibrator head length (l) in 15.8 19.3 16.3 Shipping size (l x w x h) in 29.5 x 6.7 x 23.6 29.5 x 6.7 x 23.6 29.5x6.7x23.6 Protective hose lengths ft 16.4 16.4 26.2 26.2 32.8 16.4 26.2 32.8 Vibrator head weight lb 12.8 20.2 13.7 Total weight lb 43.7 56.2 50.3 Shipping weight (including packaging) lb 50.7 60.4 53.4 Effective compaction diameter in (depending on concrete consistency) 33.5 39.
External Vibrator for Concrete Consolidation The AR 26 external vibrator was designed specifically for cast-inplace formwork as well as light precast concrete applications. Its low weight, compact size, and ability to keep a constant speed under load make it the preferred external vibrator for concrete consolidation. Accessory clamping devises are available and are designed to be lightweight, portable, and efficient. TECHNICAL DATA AR 26 AR 26/6/042 ARFU 26/6/115 8.8 x 7.5 X 4.
COMPACTION CONCRETE Electronic Frequency and Voltage Inverters will win you over with their performance and flexibility. They are designed to power up to four AR 26/6/042 external vibrators simultaneously. For wall pours, external vibrators are typically grouped in units of four and the groups are plugged and unplugged into the FUE 6 as the concrete advances down the line. Solid state technology and no moving parts make it very low maintenance. FUE 6 Length x width x height in 20.5 x 12.2 x 19.
Backpack Vibrator These gasoline vibrators feature high impact, high frequency concrete vibration. Portable vibrators are ideally suited for light to medium duty concrete work and hard to reach concrete applications. Offering over 10,000 vibrations per minute, these vibrators are portable and productive... a winning combination for any jobsite.
A wet screed that can fit the demands of every job site with a variety of blade lengths, plus each unit is designed to fit the demands of every operator. Its unique twin handle system is fully height and angle adjustable offering maximum operator comfort. P 35A in 36.7 x 36.7 x 35.6 lbs 36 Engine type 4-cycle, air-cooled gasoline engine Honda Operating speed rpm variable Piston displacement in³ Horsepower hp 1.6 Fuel tank capacity qt 0.6 Fuel consumption qt/h 0.6 Shipping weight 2.
Edging Trowel Specifically designed for up to the edge finishing, this compact trowel eliminates hand work along walls. This machine improves productivity and quality while providing more ergonomics for the operator. Offering better floating and finishing capabilities along wall lines and obstacles, the CT 24-4A edging trowel delivers an unmatched solution to the concrete job site.
in CT 36-5A CT 36-6 CT 48-8A CT 48-9 79 x 36 x 36 79 x 36 x 36 85 x 48 x 41 85 x 48 x 41 Operating weight lbs 183 183 234 227 Shipping weight lbs 220 220 284 277 41 x 40 x 29 41 x 40 x 29 51 x 46 x 43 51 x 46 x 43 Shipping size in Trowel diameter in Number of blades Speed range rpm 36 36 48 48 4 4 4 4 60-125 60-125 60-125 60-125 Pitch range 0-30° 0-30° 0-30° 0-30° Engine type air-cooled, 4 cycle, single cylinder, gasoline engine Honda Wacker Neuson Honda Wack
High Horsepower Walk-behind Trowels Designed and built with the most innovative technology, these high horsepower walk-behind trowels offer the same speed range as our standard trowel line, but with higher horsepower. These high horsepower units provide better torque for low speed floating and additional weight for those operators who prefer a heavier trowel (especially in hot, dry or windy conditions).
COMPACTION Variable Speed Walk-behind Trowels in CT 36-9-V CT 48-13A-V 79 x 36 x 41 79 x 36 x 41 85 x 48 x 41 Operating weight lbs 208 199 268 Shipping weight lbs 245 238 318 41 x 40 x 29 41 x 40 x 29 51 x 46 x 43 Shipping size (l x w x h) in Trowel diameter in Number of blades Speed range 36 48 4 4 25-200 25-200 25-200 Pitch range 0-30° 0-30° 0-30° Engine type air-cooled, 4-cycle, single cylinder, gasoline engine Honda Wacker Neuson Honda Operating speed 3800 380
Ride-on Trowels These 36-inch ride-on trowels offer quality results, high productivity, operator comfort plus unique options and features. These trowels feature a unique patentpending integrated wheel kit. This factory-installed option offers easy maneuverability around the job site. One jack lowers both wheels down, later the wheel kit conveniently folds up and under. During troweling, the wheel kit does not block operator’s line of sight.
COMPACTION Ride-on Trowels lbs Shipping size (l x w x h) in Shipping weight lbs Trowel diameter in Number of blades 101 x 51 x 58 101 x 51 x 58 1130 1343 107 x 55.75 x 64 107 x 55.
Ride-on Trowels This innovative trowel combines hydraulics and electronics to offer a true power steer system that offers the results of a hydrostatic unit matched with the responsiveness of a mechanical steer unit. Ideal for large pours and on elevated deck pours where lighter weight machines are preferred. Patented dual mode steering program to switch from settings for large open areas and for use in tight clearance areas around slab obstructions.
CONCRETE This professional ride-on trowel is the first in the industry to combine the high performance of a hydraulic drive unit with an electro-hydraulic steering system that makes operation more comfortable and the trowel more responsive to the operator’s commands. Fully hydraulic drive plus exceptionally high rotor speed provide for extra power and superior finishing.
Portable Cut-off Saws These professional cut-off saws offer a high performance 3-stage air filtration system to maximize time between maintenance intervals resulting in increased operator productivity. The high torque engine and durable design has been tested under extreme conditions to ensure reliability and optimal cutting performance. BTS 630 TECHNICAL DATA Length x width x height (without guide cart) in 31.5 x 12.4 x 14.6 Shipping size (l x w x h) in 32 x 13 x 18 Weight lb 24.
COMPACTION CONCRETE BTS SAW CART BTS 630 Length x width x height (without guide cart) in 32.5 x 12.4 x 14.6 Shipping size (l x w x h) in 32 x 13 x 18 Weight lb 24.9 Shipping weight (including packaging) lb 26.6 Blade diameter - max. in 14 Blade diameter - min. in 12 in Nominal blade speed rpm Cutting depth - max. in 1.0 4,240 5.0 Engine single cylinder 2-cycle gasoline engine Displacement in³ 5.2 Power output hp 5.
Single-phase Submersible Pumps These high performance single-phase submersible pumps are ideal for pumping water down to very low levels (as low as 0.04”). Suitable for most 110V outlets, these pumps offer big pump features for a small pump investment. PSR1 500 PSR1 500 TECHNICAL DATA Discharge diameter in 0.75 Length x width x height in 7.7 x 7.7 x 12.4 Operating weight lbs Shipping weight lbs Shipping size (l x w x h) Maximum head Maximum flow rate 26 34 in 15 x 9.7 x 9.
COMPACTION CONCRETE PSG2 500 Discharge diameter in 2 Length x width x height in 8.3 x 8.3 x 11.2 lbs Shipping weight lbs Shipping size (l x w x h) Maximum head Maximum flow rate 23 29 in 15 x 9.7 x 9.7 ft 40 gal/min 62.4 Continuous running water level in 0.2 Solid size capacity in 0.2 Motor type Single phase 60Hz Voltage Current (full load @ 110V) 110V A 6.
Single-phase Submersible Pumps No matter how large or small the job, these singlephase submersible pumps offer the versatility and durability contractors need for light dewatering. This comprehensive family of pumps offers large pump features for a small pump investment. PST2 400 TECHNICAL DATA PST2 400 / PSTF2 400* PST3 750 / PSTF3 750* Discharge diameter in 2 3 Length x width x height in 10.1 x 7.3 x 13 12.5 x 7.3 x 15.3 42 Operating weight lbs 25 Shipping weight lbs 30 48 in 16.
COMPACTION CONCRETE PSA2 500 PS2 500 PSA2 500 Discharge diameter in 2 2 Length x width x height in 7.3 x 7.3 x 12 8.7 x 7.3 x 12 22 Operating weight lbs 21 Shipping weight lbs 28 30 in 13.8 x 9.8 x 9 14.3 x 10.3 x 9 ft 39 39 Shipping size (l x w x h) Max. head Max. discharge gal/min Max. pressure Solid size capacity psi in Motor type Voltage 62.4 62.4 17 17 0.2 0.2 Single phase/60 Hz Single phase/60 Hz 110V 110V Current (full load/start @ 110V) A 6.1/12.5 6.1/12.
Single-phase Submersible Pumps No matter how large or small the job, these single-phase submersible pumps offer the versatility and durability contractors need for light dewatering. This family of pumps offers big pump features for a small pump investment. PS2 800 TECHNICAL DATA PS2 800 PSA2 800 Discharge diameter in 2 2 Length x width x height in 7.6 x 7.4 x 13.4 7.6 x 8.8 x 13.4 30 Operating weight lbs 29 Shipping weight lbs 36 37 in 18.8 x 10.5 x 10.3 18.75 x 10.5 x 10.
COMPACTION CONCRETE PS3 2200 TECHNICAL DATA PS3 1500 PSW3 1500 PS3 2200 Discharge diameter in 3 3 3 Length x width x height in 9.5 x 9.5 x 22.5 7.4 x 7.4 x 23.4 9.5 x 9.5 x 22.5 Operating weight lbs 63.5 72 64 Shipping weight lbs 78 88 78 Shipping size (l x w x h) in 13.5 x 13 x 28 26 x 11 x 13.3 13.5 x 13 x 28 Max. head ft 69 69 85 Max. pressure Solid size capacity gal/min 111 111 130 psi 30 30 37 in 0.3 0.24 0.
Three-phase Submersible Pumps No matter how large or small the job, these three-phase submersible pumps offer the versatility and durability contractors need to keep their job sites dry. Suitable for most three phase, 60 Hz voltages, these high performance pumps can efficiently move up to 260 gallons/ minute. PS3 2203 PS2 1503 TECHNICAL DATA PS2 1503* PS3 2203* Discharge diameter in 2 3 Length x width x height in 9.3 x 8.5 x 18.8 9.3 x 8.5 x 19.
COMPACTION CONCRETE PS3 3703 PS3 5503 Discharge diameter in 3 3 Length x width x height in 11.1 x 10 x 24.5 12.1 x 10.2 x 25.7 146 Operating weight lbs 121 Shipping weight lbs 136 168 in 13 x 13 x 27.8 14 x 13.8 x 28 ft 102 125 gal/min 219 260 44 54 Shipping size (l x w x h) Max. head Max. discharge Max. pressure Solid size capacity psi in Motor type Voltage 0.3 Three phase / 60 Hz 220, 440 220, 440 Current (full load/start @ 220) A 13.4 / 112 19.
Three-phase Submersible Pumps No matter how large or small the job, these three-phase submersible pumps offer the versatility and durability contractors need to keep their job sites dry. Suitable for most three phase, 60 Hz voltages, these high performance pumps can efficiently move up to 428 gallons/ minute. PS4 7503HH PS4 5503 PS4 5503 TECHNICAL DATA PS4 7503HH* Discharge diameter in 4 4 Length x width x height in 12.1 x 10.2 x 25.7 13 x 12.4 x 27.
COMPACTION CONCRETE PS4 11003HH Discharge diameter in 4 Length x width x height in 14.7 x 13.8 x 31.3 Operating weight lbs Shipping weight lbs Max. head Max. discharge Max. pressure Solid size capacity 14.8 x 14 x 32.5 ft 167 gal/min 377 psi 72.7 in Motor type Voltage 293 in 0.
Diaphragm Pumps Diaphragm trash pumps can move almost anything that flows. Built with high quality components, you will be assured of many years of top performance and durability. Designed to handle solids up to 1-5/8 inches, ideal for dewatering mud slurries and seepage areas. PDI 3A PDT 3A TECHNICAL DATA Suction & discharge diameter in PDT 2 PDT 2A PDT 3 PDI/T 3A 2 2 3 3 Length x width x height in 39.2 x 22.2 x 23.2 39.2 x 22.2 x 23.2 42 x 26.5 x 23.2 42 x 18 x 23.2/ 42 x 26.5 x 23.
COMPACTION Dewatering Pumps CONCRETE The dewatering pump series has been designed to handle the removal of relatively clean job site water. With its self-priming centrifugal pumping action and overall compact size, the pump is ideal for the contractor with the need for temporary water removal. PG 3A PG 2A PG 3 PG 3A 3 Suction & discharge diameter in 2 2 3 Length x width x height in 18.9x14.8x15.5 18.9x14.8x15.5 20.2x15.9x18.2 20.2x15.9x18.
2-inch Trash Pumps These centrifugal trash pumps have proven themselves on job sites around the world. Pumps feature hardened ductile iron impeller and volute with patented pump cover, volute and volute insert providing a rugged, easy to maintain pump that will stay on the job longer. Units can handle solids up to 1.0 inch. PT 2 PT 2 PT 2A Suction & discharge diameter in 2 2 Length x width x height 21.7 x 18.3 x 19.6 21.7 x 18.3 x 19.
COMPACTION 3-inch Trash Pumps CONCRETE Centrifugal pumps designed to keep your job site dry. With its radial flow design and built-in contractor friendly features, this line of trash pumps have redefined the quality and durability standards of self-priming centrifugal trash pumps. These 3-inch trash pumps can handle solids up to 1.5 inches.
4-inch Trash Pump Self-priming, high performance pump capable of handling solids up to 2 inches, ideal for job sites requiring fast dependable dewatering on command. Featuring electric start and a thread-on mixed flow impeller design. PTS 4V PTS 4V TECHNICAL DATA Suction & discharge diameter in 4 Length x width x height 36 x 35 x 35 in Operating weight lbs Shipping weight lbs Shipping size (l x w x h) Max. head 360 330 in 37 x 25 x 34 ft 105 Max.discharge* gpm Max.
COMPACTION 6-inch Trash Pumps CONCRETE The PT 6 offers a mixed flow impeller design producing higher volume and head for increased pump capacity. Oillubricated silicone carbide seal reduces maintenance and provides seal protection in dry-run conditions. Featuring cast ductile iron pump housing, impeller, wear plate and volute, this trash pump has redefined the quality and durability standards of self-priming centrifugal trash pumps.
4, 6, and 8-inch Automatic Self-Priming Trash Pumps The Wacker Neuson automatic self-priming centrifugal trash pump is the perfect pump for contractors, pump rental companies, mining operators, general industrial and municipal use. Highgrade cast ductile iron pump housing, wear plate, and impeller construction makes this unit jobsite tough.
COMPACTION CONCRETE APT 6 T APT 8 S Suction & discharge diameter in 6 8 8 Length x width x height in 93 x 44 x 78 148 x 64 x 97 109 x 51 x 81 Operating weight lb 3491 4623 4117 Shipping weight lb 3141 4158 3652 Shipping size (l x w x h) in 93 x 44 x 78 148 x 64 x 97 109 x 51 x 81 ft 150 150 150 2100 3500 3500 Max. discharge head APT 8 S Max. discharge gpm Max. suction lift ft 25 25 25 Solid size capacity in 3 3.125 3.
Premium Portable Generators Designed for construction rental and other demanding applications, these high performance, portable generators deliver unmatched tool starting and voltage regulation in a rugged, compact package. Built with heavyduty frames and premium components to provide long, trouble-free operation. TECHNICAL DATA Length x width x height Dry weight in lbs Shipping size (l x w x h) in GP 2500A GP 3800A 22.2 x 17.1 x 17.5 27 x 21 x 21.2 100 168 23.2 x 17.6 x 19.5 28 x 21.5 x 23.
COMPACTION GP 5600A Length x width x height in 27 x 21 x 21.2 39.5 x 27 x 26.7 34.3 x 21 x 21.2 27 x 21 x 21.2 39.5 x 27 x 26.7 34.3 x 21 x 21.2 Dry weight lbs 194 216 201 198 220 206.5 Shipping size (l x w x h) in 28 x 21.5 x 23.2 28 x 27 x 23.2 28 x 27 x 23.2 28 x 21.5 x 23.2 28 x 27 x 23.2 28 x 27 x 23.2 Shipping weight lbs 199 221 206 203 225 212 Maximum output W 5600 6600 Continuous output W 5000 6000 Continuous AC amps A 41.7/20.
Premium Portable Generator High performance portable generators to fit your job and your budget. They feature a heavy-duty, lightweight compact frame that provides job site protection while reducing storage space requirements. An integral lifting eye to accommodate a 3-inch hook makes for easy transport.
Easy to operate, portable inverter generators offer clean 120V AC power ideal for powering small tools and sensitive electronics. Units are compact, lightweight and quiet enough for almost any application, yet built rugged enough for use on the toughest job site. COMPACTION Premium Inverter Generators GPi 4300 / GPSi 4300 Length x width x height in 19.2 x 17 x 18.7 / 21.1 x 19 x 23 20.6 x 18.8 x 19.9 / 22.8 x 20.8 x 24.3 Dry weight lb 83.8 / 130 99.2 / 163 Shipping size (l x w x h) in 22.
Mobile Generators (Tier 3) The perfect range of machines to meet market and job site needs. These compact, sound attenuated generators provide single and three phase power for construction, commercial, industrial and special event applications where quiet, reliable power is needed. A solid state digital information controller monitors generator output and engine functions plus provides protection against engine and generator faults as well as standard automatic remote starting for standby applications.
COMPACTION G 70 in G 180 T3 G 240 T3 132 x 52 x 68 132 x 52 x 68 132 x 52 x 72 Operating weight lbs 8302 8313 9434 Dry weight lbs 6202 6213 6714 199x84.5x99 199x84.5x99 199 x 84.
Mobile Generators (Tier 4i) The perfect range of machines to meet market and job site needs with Tier 4i latest diesel engine emission technology. TECHNICAL DATA SKID MOUNTED Length x width x height in G 14 G 14 T4i G 25 T4i G 50 T4i 69 x 36 x 41 76.6 x 35 x 44.5 96.25 x 38 x 53 Operating weight lbs 1603 2332 3783 Dry/Shipping weight lbs 1435/1451 1911 3178 116 x 61 x 67 133 x 60 x 69 160 x 67.5 x 80 1951 2802 4663 kW/kVA 13.5/13.5 19.5/24.4 38/48 kW/kVA 14.2/14.2 20.4/25.
COMPACTION in G 100 T4i G 120 T4i 96 x 38 x 53 110 x 45 x 65 110 x 45 x 66 Operating weight lbs 4115 6242 6268 Dry weight lbs 3510 4804 4830 GENERATOR WITH TRAILER Length x width x height 160 x 68 x 80 176 x 80 x 90 176 x 80 x 90 lbs 4995 7612 7638 Prime output kW/kVA 58/72 80/100 96/120 Standby output kW/kVA 63/79 88/110 106/132 Operating weight AC voltage in single phase three phase Frequency Power factor Voltage regulation no load to full load steady state Hz 1~ / 3
Mobile Generators (Tier 4i) Utilizing the latest Cummins diesel emission technology engines, these durable, sound attenuated generators provide mobile, prime power for larger applications requiring quiet, reliable power; especially suited for areas requiring BAT (Best Available Technlogy) to meet the most stringent EPA, CARB air standards. A digital controller monitors and protects the generator and engine while providing continous operating data on an easy to read LCD display.
COMPACTION G 230 T4i in G 320 T4i 132 x 52 x 74.
Mobile Generators (Tier 4 Final) Additional models utilizing the latest diesel emission technology engines. G 25 TECHNICAL DATA SKID MOUNTED Length x width x height in G 25 T4 G 50 T4 G 150 T4 76.6 x 35 x 44.5 96.25 x 38 x 53 132 x 52 x 72.5 Operating weight lbs 2373 3388 9223 Dry weight lbs 2072 2939 6743 GENERATOR WITH TRAILER Length x width x height in Operating weight on trailer lbs 133 x 60 x 69 160 x 67.5 x 80 199 x 84.5 x 102.
COMPACTION in G 230 T4 G 320 T4 32.0 x 52.0 x 72.5 132 x 52 x 76.5 154 x 60 x 85 Operating weight lbs 9234 10,200 TBD Dry weight lbs 6754 7100 TBD 199 x 84.5 x 102.5 199 x 84.5 x 106.
Natural Gas Mobile Generators The GN 165 mobile generator is a prime power workhorse for all your natural gas fueled applications. Natural gas provides a lower emissions footprint and lower fuel cost when compared to diesel. The lower operating cost is especially true when locally produced gas is available, for example, directly from the wellhead. Powered by a spark ignited heavy duty engine from PSI, the GN 165 is EPA certified for mobile off-road applications.
G 625 Length x width x height shipping size on trailer in in 190 x 61 x 92 263 x 93 x 114 Operating weight (skid mounted) lb 14,833 Dry/shipping weight (skid mounted) lb 13,206 Operating weight (with trailer) lb 16,618 Prime output kW/kVA 500 / 625 Standby output kW/kVA 550 / 688 V at 1Ø V at 3Ø Reconnectable 120, 208 277, 480 Frequency (regulation) Hz 60 Power factor 3Ø 0.
Mobile Generators Tier 2 The G 1100 mobile generator provides all the power needed for larger applications. The rugged Cummins Tier 2 engine is housed in a heavy duty sound attenuated enclosure, perfect for all larger applications requiring quiet operation. Capable of paralleling, the G 1100 can easily be scaled up to meet even higher power demands. A digital controller monitors and protects the generator and engine while providing continuous operating data on an easy to read LCD display.
Lay-down mast version Trailer-mounted light towers feature a compact, narrow body design for cost-effective transport and storage. A 30-foot adjustable tower rotates 360-degrees for optimum lighting flexibility. Efficient LED lamps available.
Narrow Body Light Towers Standard vertical mast version The new 5-section vertical mast light tower is hydraulically actuated, decreasing the time needed to set up on jobsites. The uni-body, stamped, 10 gauge steel skid tub and lockable impact resistant, full-length doors provide a robust light tower that will withstand any of your job site applications. The compact narrow body design allows for more cost effective transport and storage.
Lay-down mast version Wide-body, trailer-mounted light towers combine superior job site lighting with various power options. A 30-foot adjustable tower rotates 360-degrees for optimum lighting flexibility.
Wide Body Light Towers Standard vertical mast version The new 5-section vertical mast light tower is hydraulically actuated, decreasing the time needed to set up on jobsites. The light bar design creates greater flexibility in directing the four metal halide light fixtures for greater light coverage on the jobsite. The wide body design still features the same great internal components, such as reliable engine options, long run fuel tank, and DOT trailer lights.
COMPACTION LTW 20Z1-VS LTW 20Z3-VS CONCRETE LTW 20Z3-V S 131 x 75.5 x 101 131 x 75.5 x 101 Operating weight lb 3345 3345 Shipping weight lb 2935 2935 Maximum tower height ft 25 25 Sound level dB(A) at 23 ft 69 71.2 Output kW 20 20 Frequency Hz 60 60 Power factor pf 1 1/0.8 ±1.5 1.0 ±1.0 0.
Light Balloons The light balloon features a compact design providing optimal brightness without glare. Ideally suited for general job site illumination, road work, indoor illumination of concrete pours and party rentals. Light balloon features rugged, simple construction allowing for use almost anywhere a reliable light source is needed.
COMPACTION Dehumidifiers CONCRETE The Dryvex™ commercial line of dehumidifiers will keep your construction and restoration projects on schedule and on budget by decreasing drying time and increasing production time for interior finish work. Features include high impact rotomolded housing, lightweight integrated design and greater moisture removal at lower temperature and relative humidity. Unit is CSA approved. AD 85LGR Length x width x height Weight in lbs AD 115LGR 23.5 x 18 x 36.75 23.
Direct Fired Radiant Heater Infrared radiant heaters heat workspaces, personnel, and objects such as equipment, concrete formwork, or other structures directly, without the need to heat the surrounding air first. Unlike convective heat, infrared heat radiates directly from the heater surface and does not rely on warming the surrounding air, making it unaffected by wind or weather.
COMPACTION CLIMATE UTILITY DEMOLITION CONCRETE Notes: COMPACTION I CONCRETE I DEMOLITION I UTILITY I CLIMATE
ARCTIC OCEAN ELLESMERE ISLAND GREENLAND SEA BAFFIN BAY BEAFORT SEA GREENLAND NORWEGI SEA AK ICELAND DAVIS STRAIT NORWAY NORTH SEA CANADA DENMARK UNITED KINGDOM NETHERLANDS IRELAND GERMA Calgary CELTIC SEA WA Ottawa WI SD WY IA CO UT IN IL MO KS OK NM NY MD WV RI NJ PORTUGAL SPAIN DE DC VA NORTH ATLANTIC OCEAN NC SC MS TX MA CT PA OH KY TN AR NH Toronto Washington, DC UNITED STATES AZ AL SWITZERLAND ME VT MI Norton Shores Milwaukee NE NV CA LUXEMBURG
KARA SEA LAPTEV SEA BARENTS SEA EAST SIBERIAN SEA COMPACTION CHUKCHI SEA IAN WHITE SEA SWEDEN RUSSIA FINLAND St. Petersburg BALTIC SEA ESTONIA BERING SEA Yekaterinburg LATVIA Moscow LITHUANIA SEA OF OKHOTSK BELARUS ANY POLAND Astana CZECH REP.
0985821 20M/Aug-2015/Layout Goes Studio/Printing Marek Group www.wackerneuson.
