Instructions / Assembly

Maintenance PD 2A / PD 3A
38 wc_tx001332gb.fm
5.8 Changing the Gearbox Oil
When Change the gearbox oil every 100 hours of operation or every 6 months.
Requirements  Machine shut down
 Engine warm
 API GL-5 rated gear oil
 Container for used oil
Procedure Perform the procedure below to change the gearbox oil.
1. Stop the engine.
2. Remove the drain plug (a) and drain the oil into a suitable container.
3. Reinstall the drain plug.
4. Remove the fill plug (b) and the level plug (c).
5. Slowly pour gear oil into the fill hole until it comes out of the level hole.
6. Reinstall the fill and level plugs.
Note: In the interests of environmental protection, dispose of waste oil and soiled
rags in accordance with environmental protection legislation.
WARNING
Burn hazard. The engine and muffler become very while running.
f Stop the engine before performing this procedure.