Instructions / Assembly

Maintenance PD 2A / PD 3A
36 wc_tx001332gb.fm
5.6 Cleaning the Sediment Cup
When Clean the engine sediment cup every 100 hours or 6 months.
Requirements  Machine shut down
 Nonflammable solvent
Procedure Perform the procedure below to service the sediment cup.
1. Stop the engine.
2. Move the fuel valve to the OFF position.
3. Remove the sediment cup (a) and the O-ring (b).
4. Wash the sediment cup and the O-ring thoroughly in a nonflammable solvent.
Dry and reinstall them.
5. Move the fuel valve to the ON position and check for leaks.
WARNING
Fire hazard. Gasoline or low-flash-point solvents are flammable and may ignite if
used to clean the machine.
f Use only nonflammable solvents when cleaning the sediment cup.