Instructions / Assembly

Maintenance PSG2 500

26 wc_tx002007gb.fm

5.6 Disassembly

Note: To enhance serviceability, the PSG2 500 has been designed so

that the entire pump portion illustrated below can be disassembled with

a 12mm box wrench.

Stand the pump upside down with the discharge connection facing

downward during disassembly and reassembly. Exercise care to

prevent the pump from tipping, which may lead to injury..

5.6.1 Remove the three hex bolts with washers (1), then remove the strainer

(2) and suction cover (3).

5.6.2 Remove the hex nut / spring / washer assembly (4).

5.6.3 Remove the impeller (5), pump casing (6), shaft sleeve (7), and the V-

ring (8).

A worn impeller may have sharp edges that can cause injury, and

should be handled with care.

CAUTION

WARNING

wc_gr004650