Operator`s manual

B A S I C S A F E T Y I N S T R U C T I O N S
37
W L 3 0
2.8.3 Seat belt
Before starting the engine:
•
adjust the seat to provide comfortable access
to all control ranges.
•
examine the seat belt webbing for any mechani-
cal or chemical damage and replace if neces-
sary.
•
inspect all seat belt hardware for functional-
ity and serviceability, repairing or replacing if
necessary.
•
fasten the seat belt and adjust to contact the
lower torso rmly.
When not in use:
• store the seat belt by placing it across the seat
pad.
•
ensure that the seat belt retractors work freely.
2.8.4 Backup alarm for reverse drive
(Optional equipment)
A backup alarm sounds when reverse gear is engaged.
The sound is to warn persons who are in the vicinity of the
loader that the loader is going into reverse.
Fig. 6
Seat belt