Operator`s manual

S E R V I C I N G A N D I N S P E C TI O N
167
W L 3 0
The engine oil lter is located on the left side of the engine
(Fig. 68).
1.
Put a receptacle for draining oil under the engine oil lter.
2. Unscrew the engine oil lter item 1 (Fig. 69):
3.
Clean the sealing surface of the lter holder Item 2
(Fig. 69).
4.
Lightly oil the rubber seal of the new engine oil lter
item 3 (Fig. 69).
5. Screw on the new engine oil lter until it stops against
the rubber seal.
6.
Tighten the new engine oil lter by hand by another half
rotation.
7.
Check the oil level and, if necessary, ll to the »Maxi-
mum« mark.
8.
Dispose of the old engine oil lter in an ecologically
sound manner.
Fig. 68
Location of the
engine oil filter
Fig. 69
Engine oil filter
2
3
1