Product Manual

wc_tx003607gb_FM10.fm

General Maintenance RD7

5.4 Lubricating the Back-up Stop Mechanism

When

Check daily. Clean and reapply grease as necessary.

Overview

To ensure proper operation and component life of the back-up stop mechanism,

apply grease to the metal components at the base of the forward/reverse control

lever. Regular cleaning and lubrication is essential for keeping the machine in

serviceable condition.

Procedure

1. Pull the forward/reverse control lever towards the operator to the reverse

position.

2. Press down the back-up stop pad to expose the travel plunger (a).

3. Clean any dirt or debris from the base of the forward/reverse control lever and

the drive disconnect (b).

4. Apply grease to the tip of the travel plunger (a) and between the drive

disconnect (b).

wc_gr014148