Product Manual

wc_tx003607gb_FM10.fm
67
RD7 General Maintenance
5.3 Water Spray Bars
Background Clogged or dirty spray bars can prevent water from spraying onto the drums. If
water spray is noticeably reduced or absent even though there is water in the tank,
then clean the spray bars.
Procedure Follow the procedure below to clean the spray bars.
1. The spray bars (a) are located above the drum scrapers.
2. Start the machine. Activate the spray system and check for free flow of water
through each spray hole (b).
3. If any of the spray holes are blocked, use a small pointed object (i.e. a stiff piece
of wire) to remove the blockage.
4. Rinse the spray bars with clean water and dry with a soft, clean cloth.
NOTICE: The cap (c) and fitting (d) are not removable.
wc_gr012950
a
b
c
d