Product Manual

wc_tx003607gb_FM10.fm
65
RD7 General Maintenance
5 General Maintenance
5.1 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks
 may be performed by the operator. Tasks designated with square bullet
points  require special training and equipment.
1
Change the hydraulic filter after first 100 hours.
2
Maintain linkages more frequently in dusty environments. Lubricating linkages is not
recommended. However, if necessary, use a dry lubricant that does not attract dust.
3
Remove the protection kit (if equipped).
Daily
Every
500
hours
Check external hardware.

Clean the machine.
3

Check air cleaner maintenance indicator.

Check hydraulic oil level.

Clean the scraper bars.

Check function of back-up stop pad and forward/
reverse control lever.

Check lubrication of the back-up stop mechanism.

Check and adjust scraper bars.

Clean battery terminals (RD 7H-ES).
3

Change hydraulic oil and filter.
1,3

Check linkage components.
2,3
