Product Manual

wc_tx003606gb_FM10.fm
58
Operation RD7
4.23 Stopping the Machine (Honda Engine)
Procedure Perform the following procedure to stop the machine.
1. Set the exciter lever (a) in the OFF position.
2. Close the water control valve (b).
3. Set the throttle lever (c) to the OFF position.
4. Turn the engine switch to the OFF position (d
2
).
5. Engage the parking brake.
6. Clean the scraper bars before storing the machine.
wc_gr012564
d
1
d
2
b
a
c
CAUTION
Possible loss of machine control. If the throttle control fails, the engine may get
stuck in the high position.
► Pull up on the decompression lever to stop the engine.
► Decompression lever may be hot. Wear protective gloves to prevent injury.