Product Manual

wc_tx003606gb_FM10.fm
57
RD7 Operation
4.22 Starting the Machine (Honda Engine)
Requirements ■ Machine is in serviceable condition and has been properly maintained
■ Fuel in the tank
Procedure Perform the procedure below to start the machine.
1. Check that the exciter lever (f) is in the OFF position.
2. Set the throttle lever to the high position (d
1
).
3. Open the fuel valve by moving the lever to the right (a
1
).
Note: If the engine is cold, move the choke lever to the closed position (b
1
). If the
engine is hot, set the choke to the open position (b
2
).
4. Turn the engine switch to the ON position (c
1
).
5. Pull the starter rope (e).
6. Open the choke as the engine warms (b
2
).
Note: Always operate the machine in the operating position.
WARNING
Personal injury hazard. Starting the machine with the exciter lever in the ON
position could result in personal injury.
► Only start the machine when the exciter lever is set to the OFF position.
wc_gr011682
d
1
f
a
1
a
2
b
1
b
2
c
1
c
2
e
wc_gr011681