Product Manual

wc_tx003606gb_FM10.fm

Operation RD7

4.21 Stopping the Machine (Hatz Engine)

Procedure

Perform the following procedure to stop the machine.

1. Set the exciter lever (a) in the OFF position.

2. Close the water control valve (b).

3. Set the throttle lever (c) to the OFF position to stop the engine.

4. On electric-start machines, turn the start key (d) to the OFF position.

5. Engage the parking brake.

6. Clean the scraper bars before storing the machine.

wc_gr011683

CAUTION

Possible loss of machine control. If the throttle control fails, the engine may get

stuck in the high position.

► Pull up on the decompression lever to stop the engine.

► Decompression lever may be hot. Wear protective gloves to prevent injury.