Product Manual

wc_tx003606gb_FM10.fm

RD7 Operation

Continued from the previous page.

9. Stand alongside the engine, facing the back of the machine (k) and grasp the

engine crank with both hands.

Note: Keep constant contact between the engine crank and the engine during this

process.

10.Turn the engine crank slowly until the pawl engages the rachet, then increase

the turning force to build up speed until the engine starts.

Note: The highest speed must be reached when the decompression lever (d)

returns to the (d

) position.

11.As soon as the engine starts, pull the engine crank out of the guide sleeve.

Note: If the engine begins to run backwards after backfiring (smoke emerges from

air cleaner), release the engine crank immediately and stop the engine.

12.To restart the engine, wait until it has come to a standstill, then repeat the

starting procedures.

13.Disengage the parking brake.

14.Allow engine to warm up for a few minutes before operating machine.

Note: Always operate the machine in the operating position.

wc_gr010234