Product Manual

wc_tx003606gb_FM10.fm

Operation RD7

Continued from the previous page.

4. Position the locking plate in the desired

orientation and set it back into the

lower handle.

5. With the handle in the transport position, re-install the lower bolt.

6. Lower the handle to the operating position.

7. With the handle in the operating position, re-install the two bolts.

Note: The handle reacts differently based on the position of the locking plate and

the type of environment or terrain the machine is operated on. Familiarize yourself

with how the handle reacts before fully operating the machine.

Result

The locking plate has now been adjusted.

Ref. Description

X Handle locks in both the storage

position and the operating position

Y Handle locks in the storage

position only

wc_gr013070