Product Manual

wc_tx003606gb_FM10.fm

RD7 Operation

4.9 Adjusting the Locking Plate

Background

The machine is equipped with a locking plate. This locking plate can be adjusted so

that the machine’s handle can be:

■ locked in the transport position and unlocked in the operating position, or

■ locked in both the operating and the transport position.

Requirements

■ Machine stopped

■ Machine standing on a level surface

Adjusting the

locking plate

Perform the procedure below to adjust the locking plate.

1. With the handle in the operating position, remove the two bolts (a). This loosens

the locking plate (b).

2. Raise the handle to the transport position.

3. Remove the lower bolt (c) and remove the locking plate.

This procedure continues on the next page.

wc_gr013056

wc_gr013057