Product Manual

wc_tx003606gb_FM10.fm

Operation RD7

4.4 Using the Back-Up Stop Pad

A back-up stop pad (a) is mounted to the machine. The back-up stop pad operates

in reverse only.

If the machine backs into an obstruction or if the operator becomes trapped

between the machine and the obstruction, the pad will be pressed and move the

control lever (b) into the forward position.

4.5 Using the Parking Brake

Introduction

The parking brake ensures that the machine will not roll when the machine is not in

use. The parking brake may be used with the engine on or off. The parking brake

will hold the machine on inclines up to 22° (40% grade) or less.

NOTICE: Do not drive against the parking brake in the engaged position. The

brake may bend and damage the machine.

Procedure

To engage the parking brake:

Rotate the handle (a) 90° counterclockwise until it seats in the deep detent.

To disengage the parking brake:

Rotate the handle (a) 90° clockwise until it seats in the shallow detent.

wc_gr011536

wc_gr001343