Product Manual

wc_tx003605gb_FM10.fm

RD7 Lifting and Transporting

3.2 Tying Down and Transporting the Machine

Requirements

■ Engine shut down

■ Chocks in place

■ Steel ropes or chains

Procedure

Perform the procedure below to tie down the machine.

1. Make sure that the transport vehicle is capable of handling the weight and size

of the machine. See Technical Data for dimensions and operating weight.

2. Place chocks (a) in front of and behind each drum.

3. Attach steel ropes or chains to the front and rear 2-point tie downs (b).

Note: In addition to the 2-point tie downs, the 4-point tie downs (c) may be used.

When using the 4-point tie downs, use steel ropes or chains and a hook to connect

to the machine.

NOTICE: Only use the tie downs to secure the machine. Do not use any other part

of the roller to tie down the machine, as severe damage to the machine may occur.

4. Attach the other end of the steel ropes or chains to the transport vehicle.

5. Place the guide handle (d) in the upright position.

wc_gr011533