Product Manual

wc_td000742en.fm
91
RD12A/12K Technical Data—RD12A (Gasoline)
11.4 Hydraulic Pressures
* Values for hard-packed surface shown. Values may differ depending on surface.
11.5 Sound Measurements
The sound pressure level at operator’s location (L
pA
):
■ RD12 = 89.5 dB(A)
This sound value was determined according to ISO 3744 for the sound power
level (L
WA
).
11.6 Measurements of Operator Exposure to Vibration
The operator of this machine should expect to be exposed to vibration levels listed
below when using the machine in performance of its normally intended function:
Maximum hand/arm vibration levels are:
■ 1.5 m/s
2
(4.9 ft/s
2
)
These are the representative values of the weighted root mean square (rms)
acceleration to which the hands and arms are subjected. These weighted rms
values are measured according to ISO 5349-1.
Whole body vibration levels do not exceed:
■ 0.22 m/s
2
(0.7 ft/s
2
)
These are the representative values of the weighted root mean square (rms)
acceleration to which the whole body is subjected. These weighted rms values are
measured according to ISO 2631-1.
The results are compliant to the limit and action vibration values (hand/arm and
whole body) as specified in European directive 2002/44/EC.
System Operating Pressure Relief Pressure
barpsibarpsi
Drive 55–83 800–1,200 200 2,900
Steering*
—while turning 0–80 0–1,160 75–80 1,090–1,160
Vibration
—single drum 76–97 1,100–1,400 206 3,000