Product Manual

wc_tx004491en.fm
57
RD12A/12K Operation
6.15 Using the Water Spray System
Water spray
controls
Water from the tank is fed to the spray bars by an electric pump. A water spray
button (a), located on the travel lever next to the vibration switch, controls the water
pump motor. A water spray dial (b) controls the water flow frequency.
To operate the water spray controls:
Guidelines
when using
When using the water spray system:
■ Check that the tank is full of water.
■ Use only clean water. Dirty water, even when filtered, can clog the system.
■ Keep the water system clean and well maintained. See Maintenance.
■ If spray does not begin immediately when the system is turned on, it may be
necessary to clean the spray bars. See Maintenance.
To start the water spray, press
button (a).
When the water spray is active,
the water spray indicator (c) will
illuminate.
To stop the water spray, press
button (a) again.
Water spray dial: Rotate the water
spray dial (b) clockwise to
increase water spray frequency.
Rotate the water spray dial
counterclockwise to decrease
water spray frequency.
wc_gr014306
a
b
c