Product Manual

wc_tx004491en.fm
52
Operation RD12A/12K
Continued from the previous page.
Stopping the
machine
1. Maneuver the machine to a flat surface with a suitable load bearing capacity.
2. Press the vibration button (e) to turn it pff.
3. Set the forward/reverse control (a) to the NEUTRAL position.
4. Press the water spray button (g) to turn it off.
5. Set the engine throttle switch to the low (turtle) position and allow the engine to
cool down.
6. Apply the parking brake. Always apply the parking brake before leaving the
machine.
Note: The parking brake engages the rear drum only.
7. Turn the start key to the OFF position.
8. Secure the drums with wheel chocks to prevent unintentional movement.
a
c
d
g
e
f
wc_gr014718
F
N
R
WARNING
The vehicle constitutes a hazard or obstacle to traffic when parked.
► Mark the vehicle with signs, lights, and other warnings.