Product Manual

wc_tx004564en.fm
40
Controls—RD12K (Diesel) RD12A/12K
5.2 Control Panel and Indicator Lights
.
wc_gr014587
1
23
4
5
6
7
89
10
11
12
13
Ref. Item Description
1 Hour meter This instrument meters machine usage.
2 Engine coolant
temperature indicator
This light flashes to indicate that the engine has overheated.
Note: The drum vibration is immediately disabled when this light
flashes. There is a 60-second delay before engine shutdown to allow
the operator to drive off of the asphalt.
NOTICE: Trace the cause of overheating and rectify the situation
before operating the machine.
3 Low engine oil pressure
indicator
This light illuminates when the ignition switch (7) is in the ON position
and the engine is not running; it goes out once the engine has started.
If the light illuminates when the engine is running, it indicates that the
engine oil pressure is low.
Do not operate the machine if this light is illuminated.
4 Vibration ON indicator This indicator light illuminates to indicate that the vibration is on.
5 Lights switch (if equipped) This switch controls power to the lights.
6 Throttle switch This switch sets the position of the throttle, either high or low.
7 Start switch This switch starts or stops the engine.
8 Air filter restriction indicator This indicator light illuminates to indicate that the air filter needs to be
changed.
9 Glow plugs indicator This indicator light illuminates to indicate that the glow plugs are on.