Repair manual

Troubleshooting the Drive System RD 27
wc_tx000949gb.fm 54
4.3 Checking the Interlock Relay
Prerequisites  Fully-charged battery
 Functioning key switch
Procedure Follow the procedure below to check the interlock relay.
1. Place the brake switch in the disengaged position (up).
2. Remove the control panel (a) from the steering column.
3. Locate the interlock relay (b) and disconnect the connector.
4. With the key in the ON position, measure the voltage between wire F765-BR-16
at the connector and ground.
Is 10.0–12.5 VDC measured?
This procedure continues on the next page.
Yes ____ No ____
Continue. Repair wire F765-BR-16.