Repair manual

Troubleshooting the Engine Start System RD 27
wc_tx000948gb.fm 46
Continued from the previous page.
4. Reconnect the start 1 relay.
5. Locate the starter solenoid.
6. Disconnect the white wire (a).
7. Place the key switch in the START position, measure the voltage between the
white wire and ground.
Is 10.0–12.5 VDC measured?
The start 1 relay has now been checked.
Yes ____ No ____
The start 1 relay is OK. The start 1 relay has failed; replace it.