Repair manual

RD 27 Troubleshooting the Engine Start System
wc_tx000948gb.fm 39
Continued from the previous page.
6. Check the continuity between wire 200-BK-16 and ground.
Does the wire have continuity to ground?
7. Reconnect the neutral relay.
8. Locate the start 2 relay and disconnect it.
9. Measure the voltage between wire 307-OR-16 at the connector and ground.
Is 10.0–12.5 VDC measured?
The neutral relay has now been checked.
If the problem has not been resolved, continue with Checking the Neutral Switch.
Yes ____ No ____
Continue. Repair wire 200-BK-16.
Yes ____ No ____
The neutral relay is OK. The neutral relay has failed; replace it.