Repair manual

RD 27 Disassembly and Assembly
wc_tx001221gb.fm 159
Continued from the previous page.
7. Cut the wires and remove the vibration switch (g).
8. Disconnect the wiring (h) from the switches and pull the wires from the joystick.
9. Remove the screws and pull the joystick (i) from the machine.
10.Remove the switches (j).
Installation Perform the procedure below to install the joystick.
1. Re-install the switches (j).
2. Secure the joystick (i) to the support plate.
This procedure continues on the next page.