Repair manual

RD 27 Disassembly and Assembly
wc_tx001221gb.fm 157
Continued from the previous page.
16.Reconnect the wiring harness to the starter solenoid (e). Also reconnect the
ground strap (f), the red wire (g), and install the clamp (h).
17.Reconnect the wires (d and e) to the alternator.
18.Reconnect the exhaust pipe (a) and gasket (b) to the engine.
19.Re-install the hydraulic reservoir, the drive pump, and the radiator.
Result The engine has now been installed.