Repair manual

Disassembly and Assembly RD 27
wc_tx001221gb.fm 156
Continued from the previous page.
10.Reconnect the wiring harness with cable clamp (n) and connector (o).
11.Reconnect the wiring harness to the glow plug (m).
12.Connect the cable tie (l).
13.Reconnect the wiring harness and the fuel line (k) with clamp on top of the
engine.
14.Connect the wiring harness to the sender (j).
15.Connect the cable tie (i) near the air hose.
This procedure continues on the next page.