Repair manual

Disassembly and Assembly RD 27
wc_tx001221gb.fm 154
Continued from the previous page.
2. Install shockmounts (y).
3. Using an appropriate crane and chains, lift and position the engine into the
machine approximately 25 cm (10 in.) out of the machine. Then, install the cable
tie (v) that secures the hydraulic hose.
4. Install the cable ties that secure the engine oil drain hose (w).
This procedure continues on the next page.
WARNING
Crushing hazard. The engine may crush you if the lifting devices fail.
f Do not stand under or reach under the engine while it is being lifted.