Repair manual

Disassembly and Assembly RD 27
wc_tx001221gb.fm 152
Continued from the previous page.
12.Cut the cable ties that secure the hose (p).
13.Remove the hydraulic oil filter (q) (with the hoses still attached) and set it aside.
14.Disconnect the throttle cable (s).
15.Remove the fasteners (t) that secure the engine assembly to the machine.
16.Connect an appropriate crane and chains to the lifting eyes (u) of the engine.
This procedure continues on the next page.
WARNING
Crushing hazard. The engine may crush you if the lifting devices fail.
f Do not stand under or reach under the engine while it is being lifted.