Repair manual

RD 27 Disassembly and Assembly
wc_tx001221gb.fm 151
Continued from the previous page.
6. Cut the cable tie (i) near the air hose.
7. Disconnect the wiring harness from the sender (j).
8. Disconnect the wiring harness and the fuel line (k) from clamp on top of the
engine.
9. Cut the cable tie (l).
10.Disconnect the wiring harness from the glow plug (m).
11.Free the wiring harness from any remaining cable clamps (n) and
connections (o).
This procedure continues on the next page.