Repair manual

RD 27 Disassembly and Assembly
wc_tx001221gb.fm 149
Continued from the previous page.
3. Connect the drain hose (f).
4. Secure the hydraulic reservoir to the machine with the screws (g).
5. Reconnect all the hydraulic hoses (e).
6. Reconnect the wiring (d) for the low-level sensor.
7. Re-install the air cleaner assembly with screw (z) and tighten the hose clamp
(a).
8. Re-install the air cleaner indicator (b).
Result The removal and installation procedures are now complete.