Repair manual

Disassembly and Assembly RD 27
wc_tx001221gb.fm 148
Continued from the previous page.
6. Remove all the screws (g) that secure the hydraulic reservoir to the machine.
7. Tip the hydraulic reservoir to access the drain hose (f). Then, disconnect the
drain hose.
8. Lift the hydraulic reservoir (h) from the machine.
9. Remove the various fittings from the hydraulic reservoir.
Installation Perform the procedure below to install the hydraulic reservoir.
1. Connect the various fittings to the hydraulic reservoir.
2. Position the hydraulic reservoir into the machine.
This procedure continues on the next page.